Targeted technology
When weaving narrow fabrics like safety belts, lifting belts, binding tapes etc., the warp material must be fed from the creel or warp beams to the weaving machine under constant tension.
When weaving from creels, delivery mechanisms are used that pull the warp ends off the creel with a coated take-off roller and feed it with the required tension to the loom.
For weaving from several warp beams, an IPC-based control can be the right solution. All warp beams can be conveniently programmed and configured from the human interface.
In both creel and warp beam applications, thread tension is measured by load cells and the warp tension values are shown on the display. The desired warp thread tension is set at the control panel, eliminating the need for adjustment by springs.
Call +41 55 286 30 20 or contact us via for further details.