Advantages with Selvedge Thread Let-offs
The selvedge thread let-offs are particularly suitable for weaving fabric edges in a variety of applications, for example for labeling on selvedges or for selvedges of airbag fabric and bolting cloth.
These are often woven with yarn of higher strength or with a higher warp density than in the rest of the fabric and thus form a solid end edge.
A sturdy selvedge binds the wefts together, thus imparting to the fabric a proper appearance and solidity, thereby preventing the fraying of the selvedge during the subsequent operations.
Further applications for selvedge thread let-offs are in the narrow fabric industry for electronic warp thread feeding.
SELVEDGE THREAD LET-OFF CS2
— Flange diam. max.: 300 mm
— Tube diam. min.: 40 mm
— Full width of bobbin max.: 210 mm
— Warp tension max: 96 N
— Supply voltage: 24 VDC
SELVEDGE THREAD LET-OFF SOLEX
— Flange diam. max. 400 mm
— Tube diam. min.: 70 mm
— Full width of bobbin max.: 250 mm
— Warp tension max.: 400 N
— Supply voltage: 230 VAC
SELVEDGE WARPER S-200
The warping machine S-200 is designed for wide warping of warp bobbins and selvedge thread bobbins. It is intended for parallel winding of warp yarns onto bobbins with a flange diameter of up to 300mm and a total width of 210mm. Larger widths can be offered on request.
— AC motor 0.18kW, 400VAC 50/60Hz
— Thread-break indication
— Warp stop-motion
— Traverse motion
— Warp diam. adjustable
— Auto Stop, when the warp diam. is reached
— Creel equipped with universal cone-holder
— 12/24/36 threads in 6 levels, 2 rows double side
— Press device, allowing uniform warping
— Universal thread tensioner